{{ variable.name }} : {{ variable.values[selectedVariantsIndex[variable_index]].name }}
Quantity:
AudioQuest's Pearl is the first rung of its USB cables. The conductors are solid Long-Grain Copper with no silver plating. Foam insulation and a metal shield wrap them. It is the cable AudioQuest builds for people replacing the lead that came in the box.
AudioQuest says solid wire avoids the interaction between strands, a major source of distortion. Long-Grain Copper has fewer grain boundaries than ordinary copper, and AudioQuest says that lowers distortion too. Every conductor is direction-controlled. Arrows on the connectors show which way it runs.
The insulation is Hard-Cell Foam, injected with nitrogen to form air pockets. AudioQuest says nitrogen neither absorbs nor releases energy, so the foam causes much less of the out-of-focus effect that solid insulation can. It also keeps the signal pair in a fixed geometry.
Around the pair sits Metal-Layer Noise-Dissipation. AudioQuest says a plain shield drains radio noise into the ground and dirties the reference. Its metal layers catch most of that noise first. Pearl is a USB 2.0 cable rated to 480 megabits per second.
Pearl ends in a flat USB-A plug for the computer end and a square USB-B plug for the DAC end. USB-A is the flat plug on a computer or streamer. USB-B is the square plug on most desktop DACs. AudioQuest does not publish the plug plating. Where it applies, arrows on the connectors show which way the cable runs.
Glenn Young tested Pearl against five dearer AudioQuest USB cables for Secrets of Home Theater and High Fidelity on August 31, 2022. He found "all-copper cables" that "seem somewhat better made than what one might get from discount suppliers."
His verdict: "I would absolutely and unequivocally recommend the AudioQuest Pearl cable as a reasonable purchase in any system at their bargain price and as a replacement for generic USB wires."
Plug the USB-A end into your computer, streamer or server and the USB-B end into your DAC. Run any arrows on the connectors toward the DAC. Then choose the DAC as the output device in your player or system sound settings.
Then listen. Other and longer lengths available. Call for prices.
A USB cable is one link in a digital chain. It usually joins these categories.
AudioQuest's name for its shield. Instead of letting a plain shield dump radio noise straight into the ground, the metal layers catch most of it first. AudioQuest says that keeps the ground reference clean.
The stiff, nitrogen-filled insulation AudioQuest uses here. Its air pockets store little of the signal's energy, and its stiffness holds the two signal wires at a fixed spacing.
Yes. AudioQuest lists 5 volts at 500 milliamps for this USB 2.0 cable, which is the standard bus-power budget. Power Delivery charging is not supported.
Where it applies, AudioQuest marks arrows on the connectors. Run them from the computer or streamer toward the DAC.
A limited lifetime warranty to the original owner, for cables bought from an authorized US dealer. AudioQuest will repair or replace a defective cable that has not been abused. Keep your proof of purchase.
AudioQuest Forest USB is the next rung. It adds 0.5% silver plating to the same Long-Grain Copper and keeps the Metal-Layer shield.
Want to learn more about USB audio, DACs, or streaming? Visit our Learning Center for guides, tips, and expert advice.
Choose which cookies you'd like to allow. Necessary cookies keep the site working and can't be switched off.