{{ variable.name }} : {{ variable.values[selectedVariantsIndex[variable_index]].name }}
Quantity:
A power cable carries the last few feet of AC from the wall into a component. It can't add power a component doesn't draw, but a poorly shielded one lets noise ride in on that current.
Kimber's PK14 Ascent keeps the same 14 AWG pure copper conductor as PK14 Base and upgrades the connectors to its WattGate gold evolution Audio Grade series, offered in AU or RH plating.
Kimber rates the 14 AWG / 2.08mm² pure copper conductors to exceed the typical 15-amp outlet rating, built with the same neutral-colored, virgin dielectric materials Kimber uses across the PK14 line.
Ascent steps up from the Base series' evolution connectors to Kimber's WattGate gold evolution Audio Grade series, drawn from the WG 330evo, 350evo and 370evo family, in AU (gold) or RH (rhodium) plating options. Kimber's own line copy for Ascent emphasizes better connectors as the defining upgrade over Base.
PK14 Ascent terminates in a WattGate gold evolution Audio Grade IEC connector, in AU or RH plating, which plugs into the inlet on your amplifier, DAC or other component, and a standard NEMA 5-15 three-prong plug for the US wall outlet at the wall end.
Plug the WattGate end into the IEC inlet on the back of your amplifier, DAC or other component, and the male end into a wall outlet or power conditioner outlet.
Then power up the system as usual.
A power cable is one link in the chain from the wall to your gear. It usually joins these categories.
Kimber builds its power cables to keep radio-frequency and electromagnetic noise from riding in on the AC line and reaching sensitive circuits. A ground wire without that shielding can act like an antenna, pulling in exactly the noise a power cable is supposed to keep out.
Every metal conductor oxidizes over time; it is unavoidable chemistry, not a defect. What varies is the rate. Denser, better-shielded conductors with quality plating oxidize far more slowly, so a well-made cable performs the same way for years instead of drifting.
No change to your safety ground. Every cable in this line keeps the full three-conductor path, hot, neutral and ground, exactly as building code requires. What differs from a stock cord is conductor quality and shielding, not the wiring topology.
Kimber PK14 Palladian is the next rung, and the top of the PK14 line. Kimber's Summit Series Palladian build is the cable the company calls the finest power cable available.
Want to learn more about power cables, AC filtration, or system setup? Visit our Learning Center for guides, tips, and expert advice.
Choose which cookies you'd like to allow. Necessary cookies keep the site working and can't be switched off.