{{ variable.name }} : {{ variable.values[selectedVariantsIndex[variable_index]].name }}
Quantity:
A power cable carries the last few feet of AC from the wall into a component. It can't add power a component doesn't draw, but a poorly shielded one lets noise ride in on that current.
Cardas's Clear Reflection carries three 11.5 AWG litz conductors, double shielding, and the company's premium Cardas E-5 connectors. Cardas says it brings modern conductor technology to a classic power cable design, and calls it a phenomenal value.
Cardas specifies three 11.5 AWG litz conductors for Clear Reflection, insulated in a PFA jacket with PE air tubes and PTFE tape spacing the geometry. Litz construction, many fine strands individually insulated and woven together, is built to reduce the skin-effect losses that a single heavy conductor suffers at higher frequencies.
The cable is double shielded to keep radio-frequency and electromagnetic noise off the conductors, and terminates in Cardas's E-5 connector, the same premium connector family the company carries through its higher power lines. The gauge runs 3x11.5 AWG for an outside diameter of 0.610 inches, or 15.49mm.
Clear Reflection terminates in a Cardas E-5 power plug at the component end, which plugs into the IEC inlet on your amplifier, DAC or other component, and a standard NEMA 5-15 three-prong plug for the US wall outlet at the wall end.
Plug the E-5 end into the IEC inlet on the back of your amplifier, DAC or other component, and the male end into a wall outlet or power conditioner outlet.
Then power up the system as usual. Other and longer lengths available. Call for prices.
A power cable is one link in the chain from the wall to your gear. It usually joins these categories.
Cardas builds its power cables to keep radio-frequency and electromagnetic noise from riding in on the AC line and reaching sensitive circuits. A ground wire without that shielding can act like an antenna, pulling in exactly the noise a power cable is supposed to keep out.
Every metal conductor oxidizes over time; it is unavoidable chemistry, not a defect. What varies is the rate. Denser, better-shielded conductors with quality plating oxidize far more slowly, so a well-made cable performs the same way for years instead of drifting.
No change to your safety ground. Every cable in this line keeps the full three-conductor path, hot, neutral and ground, exactly as building code requires. What differs from a stock cord is conductor quality and shielding, not the wiring topology.
Cardas Clear is the next rung. Cardas describes it as born from its Golden Reference Power line, with additional filtering that increases dynamics.
Want to learn more about power cables, AC filtration, or system setup? Visit our Learning Center for guides, tips, and expert advice.
Choose which cookies you'd like to allow. Necessary cookies keep the site working and can't be switched off.