{{ variable.name }} : {{ variable.values[selectedVariantsIndex[variable_index]].name }}
Quantity:
Cardas Audio's Clear is the interconnect Cardas designed for reference systems in acoustically neutral rooms. The company describes it as completely neutral and transparent, with superb dynamics, extension and speed. It says the Clear works in long or short runs alike. This is the Rev.1 version. It is hand terminated in Bandon, Oregon.
Other length & termination options are available. Call us to discuss your needs.
Three conductors at 25.5 AWG sit in an equilateral triad, a triangle rather than a pair or a square. Each is a Matched Propagation conductor on a Kevlar core, built from Cardas Grade 1 copper, 99.9999% pure, in Litz form with every strand enamel coated.
The individual strands run from 41 AWG to 39 AWG, and their sizes step in Golden Ratio proportions. Each conductor wears an ultra-thin extruded PTFE jacket and sits inside an anti-static LDPE air tube. Carbon-impregnated PTFE tape binds the three.
A second ring of PTFE air tubes, scaled 1.618 times larger than the core tubes, holds the composite shield of tinned copper and magnet wire away from the signal. An ultra-soft extruded TPR jacket finishes the cable. It measures 11.43 mm across.
Clear ends in the Cardas SRCA RCA plug, the connector Cardas fits to its flagship tier. It is machined from high-copper, non-magnetic brass. The contacts are silver plated with a rhodium flash. A gold-plated cover screws on over the cable. Its cable opening is 9.5 mm.
Stereophile lists the Clear Rev.1 in its 2025 Recommended Components, noting that with it in his system its reviewer "gained significant measures of detail and transparency."
The Absolute Sound named the Clear an Editors' Choice in 2013, and Stereophile has kept it in Recommended Components from the 2018 edition through the 2026 edition.
Run the Clear from a line-level output, a DAC, streamer, CD player or phono stage, to a line-level input on your preamp or amplifier. Keep left to left and right to right. Push each SRCA plug straight on until it seats. Pull it off by the barrel, never by the cable.
Then leave it alone. Cardas says its cables settle with use, so plug in and listen.
Measure the route the cable will really take between your components, around shelves and behind the rack. Then add a little slack. As audio legend George Cardas puts it, "A cable that's just long enough usually turns out to be just not long enough." Keep the left and right cables the same length. We recommend a matched pair.
If both components offer balanced XLR jacks, we recommend using XLRs. If one has only RCA jacks, use RCA, and skip the adapter. You only get the possible benefits of a balanced output with a pure XLR-to-XLR connection.
If your amplifier and speakers sit far from your source, we recommend a long interconnect over a long speaker cable. A really long interconnect affects system performance less than a really long speaker cable.
An interconnect often stays in a system for years, so it is easy to overlook. Look again when something else changes: a new DAC, streamer or phono stage, a better amplifier, or a move to components with balanced XLR jacks.
An interconnect is one link in the chain. It usually joins these categories.
Three conductors arranged as a triangle with equal sides. Cardas uses it in the Clear in place of a twisted pair or a star-quad.
Cardas's machined RCA plug for its flagship tier. Brass body, silver contacts with a rhodium flash, and a gold cover that screws on.
The current version of the Clear. Cardas lists the interconnect as Rev 1, and Stereophile notes the revision applies to both the RCA and the XLR versions.
Cardas says at most 200 hours, and usually half that. Its advice is simple: "Plug them in, leave them plugged in, and enjoy your life."
A lifetime warranty. Every Litz strand is sealed in enamel, so the copper does not oxidize. Cardas says that is why its cables last.
Cardas Clear Beyond is the top of the line. It moves to four conductors in a star-quad, strands down to 47 gauge, and a 13 mm body.
Audio Advisor's tour of the Cardas factory in Bandon, where the Clear is built and terminated.
Audio Advisor walks through Cardas cable construction, from Litz strands to hand-soldered plugs.
The most popular configurations are shown on this page. If your system requires a different length or termination, call our audio experts. We’ll help you choose the right configuration and arrange a custom cable for your system.
Want to learn more about interconnects, reference systems, or RCA versus XLR? Visit our Learning Center for guides, tips, and expert advice.
Choose which cookies you'd like to allow. Necessary cookies keep the site working and can't be switched off.